Up to 224 spindles for the FT60; up to 168 spindles for the FT70
Independent drives to lower mechanical transmission, vibrations and friction and therefore increase efficiency
Multi-motor drive for the spindles to increase transmission efficiency: one motor every 32 spindles for the FT60; one motor every 24 spindles for the FT70
Premium efficiency (IE3) motors for the spindles drive to excel on energetic performances
Multi-motor drive for the flyers to increase transmission efficiency: one motor every 64 flyers for the FT60; one motor every 48 flyers for the FT70
Timing belts for the spindles and the flyers to lower maintenance and noise
Innovative two-motors cylinders drive to allow an electronic setting of the draft (no change of gears required)
Feeding creel with hexagonal rollers to prevent false drafts of the slivers
3-over-3 or 4-over-4 drafting unit
Pneumatic or mechanical pressure arm
Cylinders diameter of either 32 mm or 27 mm for a low gauge and a better control of short fibers between first and second cylinder
Constant automatic adjustment of spindles speed to keep roving tension within the desired range
Individual sensors to always guarantee an immediate stop of the machine in case of roving breakage
No suction required so that the client can save 4 Kw every hour
Low gauge between the spindles, 110 mm for the FT60, 130 mm for the FT70, to reach maximum productivity per sqm
Bobbin tube diameter of 53.5 mm or 48 mm for a higher bobbin capacity
Bobbin exchanger installable on either the head or the rear stock
Perfect integration with Marzoli MTR and MTT bobbin transport solutions (e.g. the doffer rail is accessible to the MTT trolley trains)
Connection with Marzoli YarNet production management platform
